2021 24 Mxz

[Gene3x]

13 minutes ago, agarabaghi said:

fits no issue? 

We put an 18" prop on the 2020 A24.... ill get the specs. 

Is it the ACME 3311  or the OJ V4 1784 ?

[agarabaghi]

2 minutes ago, Gene3x said:

Is it the ACME 3311  or the OJ V4 1784 ?

want to say acme 3311 but let me ask.

[boardjnky4]

3 minutes ago, agarabaghi said:

got a link to the prop? or info?

https://www.wakemakers.com/acme-2923-propeller.html

I had Nettle props re-pitch mine to 15.5x14, because for my usage I need a little better fuel economy and cruising speed. They don't make a 15.5x14. You've got to go up to I think a 15.5x15 or something.

[agarabaghi]

i wonder how the 15.5x13 would compared to the 15x13 im running now.... 

rpm wise .... dont wanna hijack this thread though

[Gene3x]

11 minutes ago, boardjnky4 said:

yeah it fits. MIGHT burn your gel over the course of around 100-150 hours, but I have not noticed ANYTHING yet.

Isn't there a stainless plate you can put on your hull to prevent burn? 

[boardjnky4]

Just now, Gene3x said:

Isn't there a stainless plate you can put on your hull to prevent burn? 

Yeah, I actually bought a very thin 3m backed aluminum sheet to stick under there, but haven't installed it yet.

[Gene3x]

Just now, boardjnky4 said:

Yeah, I actually bought a very thin 3m backed aluminum sheet to stick under there, but haven't installed it yet.

You have a link?  I am doing this now.  Just ordered the 3311 ....  lol

[boardjnky4]

4 minutes ago, Gene3x said:

You have a link?  I am doing this now.  Just ordered the 3311 ....  lol

https://www.jpplus.com/alumamark-satin-silver-005-aluminum-sheet-with-adhesive

No idea if it will work or not. I'm no engineer lol.

[Sparky450]

7 hours ago, ahopkinsVTX said:

. If I mat the pedal in my truck it’s not as quick/fast as if I work the throttle through the torque curves as I feel the engine pulling stronger. At least that is what my butt gauge tells me. 

Funny you say that about the truck my RAM CTD is the same way 

[Sparky450]

4 hours ago, agarabaghi said:

Might be different on the Axis line, but no issues with over slammed A24, full ballast, 1100lead, 8-10 people getting on plane with 18" prop and m6. 

Full slammed A22, full ballast, 800 lead, 3-4people, 2773 prop m5 (thought not super fast to get to wakeboard speeds. 

So what does the 18” prop do to cruise speeds 

Edited September 11, 2020 by Sparky450

[agarabaghi]

no idea we live in FL and our lakes are smallish and never go over wakeboard speeds. 

Edited September 11, 2020 by agarabaghi

[Gene3x]

2 hours ago, Sparky450 said:

So what does the 18” prop do to cruise speeds 

It should not make much of a difference unless the pitch changes.  

Can one of you guys with the 24MXZ take a look under your boat and see how much extras clearance there is with the stock 17"  prop please?  Mine is at the dealership and hour away and they are shying away from the question. For liability concerns I assume?  

[Gene3x]

On 9/11/2020 at 3:13 PM, Gene3x said:

Can one of you guys with the 24MXZ take a look under your boat and see how much extras clearance there is with the stock 17"  prop please?  Mine is at the dealership .

Anyone have a chance to look at the clearance?

[Chappy]

On 9/11/2020 at 1:13 PM, Gene3x said:

It should not make much of a difference unless the pitch changes.  

Can one of you guys with the 24MXZ take a look under your boat and see how much extras clearance there is with the stock 17"  prop please?  Mine is at the dealership and hour away and they are shying away from the question. For liability concerns I assume?  

I don't have an exact measurement but I would say it slightly less than  2", when I change props a 2x4 just fits.

[Gene3x]

Thanks man.  That is what I am looking for.  Just making sure the 18" that I just ordered will fit! 

[Gene3x]

Well the 18" prop fit and works but runs the rpms up to high to around 5000 which burns gas like crazy.   I am going to have to go back up in pitch to at least a 14"  More experimentation needed.