Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Where do I mount my shower for a 93 Echelon?


danadog

Recommended Posts

I just got my heatercraft 101sc shower and I wanted to find out where the other owners mounted their shower controls, pump and where did you drill for the tubing?

Thanks,

Danadog

Link to comment

I believe the factory install (I know I replaced one on a 95ish echelon awhile ago) was on the port side of the stern in a box mouted into the fiberglass (near the step pads). Not sure I'd go that route though.

Ive also seen them with the controls and pump mounted in the engine compartment and the shower head kept under the rear seat, or on the side of that seat - this way you dont have to drill any holes.

Good luck and im sure other guys will tune in with some cool ideas.

Chris

Link to comment
I believe the factory install (I know I replaced one on a 95ish echelon awhile ago) was on the port side of the stern in a box mouted into the fiberglass (near the step pads). Not sure I'd go that route though.

Ive also seen them with the controls and pump mounted in the engine compartment and the shower head kept under the rear seat, or on the side of that seat - this way you dont have to drill any holes.

Good luck and im sure other guys will tune in with some cool ideas.

Chris

This is how my '97 Echelon was mounted. Once the temp was set, I never adjusted them again (well, if you dont count the water fight with my buddies MC - had to go FULL COLD for that).

Link to comment

Thanks for the insight guys,

I will be tackling the project this weekend.

I believe the factory install (I know I replaced one on a 95ish echelon awhile ago) was on the port side of the stern in a box mouted into the fiberglass (near the step pads). Not sure I'd go that route though.

Ive also seen them with the controls and pump mounted in the engine compartment and the shower head kept under the rear seat, or on the side of that seat - this way you dont have to drill any holes.

Good luck and im sure other guys will tune in with some cool ideas.

Chris

This is how my '97 Echelon was mounted. Once the temp was set, I never adjusted them again (well, if you dont count the water fight with my buddies MC - had to go FULL COLD for that).

Link to comment
Thanks for the insight guys,

I will be tackling the project this weekend.

Here's a pic of my '97 Echelon. It's hard to see from this pic, (sorry, it's the best I got) but on the very bottom of the picture you can see the white controls. It will at least give you a little idea where it was mounted.

post-135-1143216551_thumb.jpg

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...