Welcome to TheMalibuCrew!
As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!
All Activity
- Past hour
-
It’s throttle by wire, so no cables. There’s no slip in the throttle arm and the gap is relatively consistent, so I don’t think anything is warm. I can do fine because I drive a lot, but when we have a crew skiing sometimes I get a jolt in the hole shot.
-
Blinking amplifier - intermittent tower speaker clicking
MLA replied to scrupulous's topic in Stereo Info & How-To
The blinking may have a pattern. If so, its a diagnostic code. Watch for the long and short flashes and reference against the manual. -
carnold12 reacted to a post in a topic: Tommys vs Malibu
- Today
-
Sunbird51 joined the community
-
I have a 2013 Malibu MXZ Wakestter.... I had the dealer install the plug & play additional ballast tanks a couple years ago. Kids were small at the time so I never used them. Since, I had to replace the conrol panel module due to delamination. Since I replaced the control panel, I tried filling the plug & play ballasts but they didn't fill. Is this a programming thing? Does the new control panel need to be programmed to fill the ballasts? Thanks!
-
Your local dealer may elect to become a pinched-a$s-b!tch when it comes to service or warranty work. I personally don't understand why they do that, but some of them think that it is important for you to be a customer of all aspects of their company in order to partake of only some of the aspects. Driving customers away is never good for business. Attempting to gain customers by threatening to not service their boat is not good for business either. Your distant dealer may not be able to conveniently title or register your new boat. It shouldn't be a problem for you to do it, and they shouldn't charge you for it if they can't do it for you.
-
I think I would prep it well and spray it with clear aircraft paint such as Awlgrip or Imron. I had a Glastron Carlson CVX-16 in metal flake with an Imron clearcoat that didn't need waxing or other maintenance. Use it, wash it, put it away. I suspect it would work well as a freshwater bottom paint. On the other hand, the best protection for a hull left in salt water is a good non-fouling bottom paint (generally with added copper).
-
formulaben reacted to a post in a topic: ‘98 Sunsetter LX Oil Change
-
formulaben reacted to a post in a topic: ‘98 Sunsetter LX Oil Change
-
Have a few customers boats that have been 100% done in ppf. It needs to be installed properly in order to last, edges are much easier to catch and peel up than in an automotive application. Any bumps against docks have the potential to scuff the ppf and the entire panel will need replacing. It’s also crazy money for such a large application so get a few quotes. I have not seen a boat done with metal flake to protect fading but I don’t see why it wouldn’t work.
-
formulaben reacted to a post in a topic: Part Number for Monsoon 340 Water Circulation Pump? (Not raw water pump)
-
I don’t think there’s a good clear film option. The best option would be to invest in a lift. You might have good luck going with ceramic coating and removing the boat and clean/wax/buff it multiple times per season. But with ceramic coating, it will have to be redone every 2-3 years and by that time you could have likely bought a lift for less money than the ceramic coatings. My tint guy at work uses a clear film called gorilla film over the glass tint in hospital patient rooms. It’s about 8-10 mil thick and holds up really well to getting chairs and equipment bumped into them without damaging the expensive film underneath. It’s similar to clear bra that goes on cars. I’m sure there would be a way to get it installed.
-
Blinking amplifier - intermittent tower speaker clicking
scrupulous posted a topic in Stereo Info & How-To
The other night we were on the boat, we lost our dash display for a moment, and when it came back, our tower speakers were only working intermittently and clicking, like every 30 seconds or so. Today I was under the helm and I see that one of my amplifiers is blinking red, occasionally it will be purple and blue as well. I think the blinking patterns may coincide with the clicking speakers. Any thoughts on what this could be? The amp blinking is the forward amp, which am assuming is the tower speaker amplifier. -
TCaywood joined the community
-
Has anyone tried or thought of trying to have a clear wrap done a boat that sits in the water for long periods of time? would it help with blistering or saving the metallic gel coat? Atleast going up to the next lines on the boat that sit above the water line. My boat usually sits in a slip for the season and my previous boat the gelcoat lost its metallic to it. Just trying to keep it looking great. Also though about cermaic coating whats everyones thoughts, besides taking it out very couple of weeks cleaning and letting dry out?
-
rgardner joined the community
-
Has anyone purchased from a non local Malibu dealer? Anything to know that is different from a local dealer?
-
Bondo972 joined the community
-
Just got this email from my local dealer, apparently they are moving the Tommy's boats around if other dealers are willing to take them
-
A friend’s CC200 does the same thing, makes me think the throttle assembly may be a culprit.
-
Is your throttle electronic or mechanical cables? If it is cables, the end nuts are probably worn out. If it is electronic, the assembly may be loose or worn. I would think that the rheostat is adjustable for dead band, but I have not looked in one.
-
1995 Malibu Sunsetter w/ Chev 350 Mercuser
Woodski replied to Watkins's topic in General Discussion Area
Try places like iboats, wholesale marine and google mercruiser parts + cooling hoses or similar buzz words. If all else fails you can get lucky at a good auto parts store. -
My throttle has about a 1” dead spot once it’s engaged in drive before it starts to accelerate. My buddy’s MC does the same thing. It’s a bit of a PITA for skiing as it’s a little unpredictable when the boat will engage. Is there an adjustment setting somewhere to eliminate this?
-
Having trouble finding eng parts (intake hose , off crank w/p) for mu boat. Any recommendations?
-
Watkins joined the community
-
@IXFE - the list of the 4 that don’t get a replacement dealership? Bummer for those customers. @Txstoj - I would not have guessed that, all the ski schools and water access in Florida. Interesting.
-
DFW - its the #1 inboard boat market in the country.
-
Alec joined the community
-
What tower is that I bought a 93 echelon recently and my tower mounts are in the same spot but I can't find a tower that matches the mount location
-
My experience is more weight in the bow helps tracking in most boats but if it lifts the aft/transom too much the wake gets adversely impacted especially at the -22 "bump". So there is a tradeoff. Usually the best bet is get the boat as balanced forward and aft as you can get it.
-
Nevada and Arizona. Our seasons are in full swing already and they were some of the first to lock up. Clearly Malibu had plans already. Inquiries into Malibu about taking over the local territory and the business were met with "Thanks, we're good."
-
Dwight built himself a carbon fiber platform, motor box, gutted the transom area, stripped a ton of weight off the engine, and put a gas tank under the bow and apparently it tracks great and hauls the mail.
-
Port side seat back adjustment
csleaver replied to tgaffin's topic in Maintenance, Tech Info & Troubleshooting
I have seen similar problems with Malibu and Axis Wake-View seats and it tends to happen when the seat bracket is bent or damaged. Once the bracket is bent, the seat can't be pushed down far enough to reset. Replacing the bracket tends to be the fix. -
Malibu GX tower warning message
csleaver replied to Malibutech96's topic in Maintenance, Tech Info & Troubleshooting
- 2 replies
-
- warning
- tower wiring
-
(and 1 more)
Tagged with:
-
Malibu GX tower warning message
csleaver replied to Malibutech96's topic in Maintenance, Tech Info & Troubleshooting
Just below where the tower is mounted, on the starboard side, there is a single Delphi connector on the deck wiring harness with a brown/yellow wire labeled "GX Signal". It needs to be connected to the tower harness tan/blue wire labeled "TWR UP SIG". There is also a single purple/white wire below the port tower mount labeled "GX Signal power" that needs to be connected to the tower harness. If either one is not connected, then it will cause a GX Tower Down alarm. Check that first.- 2 replies
-
- warning
- tower wiring
-
(and 1 more)
Tagged with: