Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

  • Recent Posts

    • I'm on a river, but it has very little currwnt/wind to affect speed. My 2020 t22 I never had this issue 

    • Does any one run the gx tower down cover on there M220? Or any similar sized boat with gx tower and the tower down cover. Just looking to see what you think of the fit and how well it is against water pooling when left outside in the rain.  Cover will be used only when in slip not for trailering. If you have any pictures that woudl help too.

      Edited by SRB
    • Bradley Thornton

      Posted

      Has been some talk about this. Are you on a lake or river? I think the issue was on river. Don't know answer but you should be able to search and find it.

    • 98sportsterlx

      Posted

      Is anyone having issues with their cruise control. I have 2024 T220 m5 motor and the cruise is all messed up. If I set my cruise setpoint at 22mph I'm actually going 23.5-24 according to GPS, to obtain 22mph I have to set cruise at 20.6mph. I know you can adjust actual speed on paddle wheel but that's not the issue, it's the setpoint speed, almost like calibration is wrong in setting to control throttle. Does anyone have any ideas, the dealer is checking g with malibu but so far nothing..

    • On 4/28/2024 at 2:29 PM, 604wakesurf said:

      Had the same issue. I opted not to raise the torsion bars as I needed to store the boat in the garage over the winter.

      Made these up. Total bolt on and they have worked great.

      6B2E3783-4A62-4929-A4C6-E32C573A7AEE.jpeg

      Did you actually make those or buy them?

  • Member Statistics

    42,332
    Total Members
    8,865
    Most Online
    CraigW
    Newest Member
    CraigW
    Joined
×
×
  • Create New...