Search the Community

New owner of 2016 VTX20. Paired phone with Bluetooth but plays back in AUX function. Ever seen this before? Having other odd behaviors so interested in seeing if there is a thread that connects them together.

I am working on installing SX-65 speakers on a V-ride. It only had two speakers at the console by the windshield. I've already read about the PITA of installing the ones by the windshield. I am adding two more towards the back. 1- Where to install the back ones? I do not like them near the floor at the panel where the transmission is. I would really like them installed in the opening on the sides of the seating area since they will be closer to ear height and less at risk of getting kicked and damaged by my three crazy kids. However, the V-ride just has holes there. Anyone has build an enclosure for these to install in this hole? Suggestions, pictures would be great. 2- Finally, A sub is in the thoughts. Don't have it yet. I am picky with my audio so I will need one eventually. I do want to build an enclosure for the foot rest area. What wood do you recommend? I can coat with fiberglass. I have always used the high density particle stuff in cars because it just sounds better but that would be terrible if any moisture gets to it. 3- I am also planning on adding a second battery. What brand, (deep cycle I imagine) for running the audio. Also, on a V-ride, is the electrical system of the boat isolated in a way that you can have one battery dedicated to the engine and the other for the audio and other stuff. Still looking into how to install the second battery properly on my boat. Thanks!

We're going to be replacing the WS REV8s that came stock with 4 WS REV10s. For those who have wired the G3.5 tower, is there any chance of getting 4 runs of this through the port tower base? Wet Sounds WWX-SPK/RGB Combo https://www.crutchfield.com/p_867XSPKRGB/Wet-Sounds-WWX-SPK-RGB-Combo.html We're not planning to run RGB now, but if we're running wire I thought it would be worth going ahead and prepping for it. Thx so much for your input! 2017 VLX 22

So I've searched this forum and couldn't come up with an answer. I wanted to add a subwoofer to this sound system because it didn't come with one from the factory. It's the MXZ pack and has two amps. Obviously, the amps are factory now and have a wiring harness going into them so I can't just wire the sub into them. However, I thought the "Sub Power" plug was the speaker wires that I just needed to plug into my sub, that didn't work either. The deck says that the sub is turned on. Is there a way to run a sub off this factory setup? What is the "Sub Power" plug supposed to go to? Any advice would help. I'm not dumb when it comes to car audio but I can't figure this system out. Thanks!!