2019 24MXZ oil change

[rjohn]

Hi,

i am trying to find the oil drain hose. I found one hose but it attaches I think below the oil filter.  Here is a photo.

is this the correct hose.  It is very short and will not reach the drain hole.

Thanks for your help!

https://1drv.ms/i/s!ApqJ7VKQEW57kapTv7N-MyCou6Byvg

[dalt1]

Probably coiled and Zip tied so it won't pull out. My 18 model was like that. Follow down the hose and see if that is the case.

[rjohn]

Thanks! That was the situation, zip tied!

any thoughts on an female adaptor to hook a tube to it? It will not fit though my drain hole due to metal crimp on the connector.  
 

thanks!!

[wdr]

The crimped on connector is an Otiker clamp that if you decide to pull it off really won’t hurt anything. My ‘19 didn’t even come with one. I have screwed a rubber hose section onto the threaded end and slid it over the suction hose on my pump. I normally just let it gravity drain overnight before I refill it.