Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

ballast pump blowing fuses

Recommended Posts

The center tank fill pump on my 2012 Wakesetter VLX keeps blowing the fuse under the dash.  I checked the pump and it works at another location.  When switching a known working pump into the fill position, it still blows the fuse (immediately after it's engaged).  I can't see any obvious wiring problems.  All the other fill and drain pumps work fine.  I'm hoping it's not in the MLS controller.  Any help would be very much appreciated.  

Link to comment

First dumb question. Is it the right size fuse?

Secondly.  Have you tied turning on that circuit without any pump plugged in?

If it pops doing that. It’s most likely a short somewhere in that feed line. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...