Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2014 LSV 247 with LS3 engine code for cylinder 7


Recommended Posts

Rich777

Ju. st bought boat last week, ran great for 2 hours now won't go over 10 mph. Has engine code for 655597. I have 2 questions, does this system have a OBD2 connector for a scan tool? (i just upgraded my SNAPON scanner last week), and the next question is, are the coil packs a (marine specific) coil pack? any input would be greatly appreciated!!!

Link to comment

You would need a OBD-M CAN diagnostic tool to connect to your ECM.  The most commonly used one, and what Indmar and Marine Power recommends, is a Rinda Diacom kit which allows a Windows laptop to connect to your engine.

https://www.rinda.com/rindashop/shop/diacom/diacom-94030c-kit

 

Coil packs for the LS3 should be ACDelco parts, but you have to find one that is is same as what is on you motor.  This is the one used on Indmar engines.

https://www.dropbox.com/s/cbxgl3psjwmj7oj/551756_20180417_204917.jpg?dl=0

I bet yours has an ACDelco number stamped right on it.

Did you narrowed down your running issue to a failed coil pack, or is it a guess?

Link to comment
Rich777

I’m just brainstorming before I start digging into it. And I’ll check out that link you sent. Thanks!

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...