Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

01 Sunsetter LXI sunpad dimensions


mcm29

Recommended Posts

I’m planning to take the one piece Sunpad off the boat to get a new skin this winter. Does anyone have the dimensions handy. I’m trying to figure out if it’ll fit in my car or if I have to put a roof carrier on when I head to the boat this weekend. 
 

thanks in advance 

Link to comment

I would not put in on the rack unless your going slow and short.   It is an aluminum honeycomb panel and I could see the wind bending it up at highway speeds.

Edited by Bozboat
Link to comment
20 minutes ago, Bozboat said:

I would not put in on the rack unless your going slow and short.   It is an aluminum honeycomb panel and I would see the wind bending it up at highway speeds.

Good point. I was thinking about putting in a large cargo box with some padding to prevent it from moving around too much.

Link to comment

If the beam on the 01 SSLXI is 93.5",  a good guess on the width of the hatch would be 80-83" and about 36" fore to aft, which should fit in any hatchback or sedan with a lay down rear seat back.  

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...