2022 25 LSV Lift Set Up

[4mc]

I have a used 8800 lb lift that's going to be installed in a couple of weeks.  Is there a way to fine-tune the height and width of the bunks prior to my 25 LSV arriving, or do they need to fine-tune when the boat is at the dock?

Want to be certain bunks are right and boat is forward enough that my swim deep does not hang out the back of the slip.

Edited September 3, 2021 by 4mc
Typo

[EchelonMike]

On 9/3/2021 at 5:27 PM, 4mc said:

I have a used 8800 lb lift that's going to be installed in a couple of weeks.  Is there a way to fine-tune the height and width of the bunks prior to my 25 LSV arriving, or do they need to fine-tune when the boat is at the dock?

Want to be certain bunks are right and boat is forward enough that my swim deep does not hang out the back of the slip.

Do you know what boat was on it prior to your purchase?  Are you doing the install yourself?  Here's the 8800 manual.  https://hydrohoist.blob.core.windows.net/media/1105/ul2-manual-44-66-88-1-31-2017.pdf

[Sixer]

I found the numbers somewhere on here for the 23 LSV last year and it is what I used for my boat, which worked great.  Bunk spacing: 33" apart, at least 10" clearance for fins, and 18" for outdrive.  25 should be somewhere close to that, if not it should give you a good starting point.