Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2011 Tower Lights


rlanderos11

Recommended Posts

There is an optional fused double relay harness from Malibu that connects to the power module power cable, to the ground buss bar, to the tower light harness, and to the labeled weather pack connector under the helm in the dash harness.  Of course, you could make your own harness, fuse, and relay wiring as well.

Link to post

On the dash viper harness there is a white wire and a white with black stripe wire with female bullet connectors on the ends that are loose and not connected to anything.  Those are the ground trigger wires from the touch screen for the tower lights.  Those wires can be connected to a relay harness like p/n 3910553 from Malibu, or you can make your own harness with relays.  The relays are then connected to the helm power cable with fused wires.  The relays would then get wired to the tower light power connection and the ground connection would go to the helm buss bar.

When the tower light icons on the touch screen are selected the wires from the viper harness will provide a ground to energize the relays.  So, if everything is wired correctly the lights will turn on using the touch screen.  You may need a strong understanding of how relays work to wire the four circuits properly.

Link to post
rlanderos11
On 8/22/2021 at 10:28 PM, csleaver said:

On the dash viper harness there is a white wire and a white with black stripe wire with female bullet connectors on the ends that are loose and not connected to anything.  Those are the ground trigger wires from the touch screen for the tower lights.  Those wires can be connected to a relay harness like p/n 3910553 from Malibu, or you can make your own harness with relays.  The relays are then connected to the helm power cable with fused wires.  The relays would then get wired to the tower light power connection and the ground connection would go to the helm buss bar.

When the tower light icons on the touch screen are selected the wires from the viper harness will provide a ground to energize the relays.  So, if everything is wired correctly the lights will turn on using the touch screen.  You may need a strong understanding of how relays work to wire the four circuits properly.

Thank you for all your help I was able to tap into this wires and make my lights work with touch screen. I really appreciate taking the time to help me out . 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...