Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

On my third ECM and found this as I did a continuity test on engine harness Part# 801066 for my 2004 Malibu Wakesetter VLX

Recommended Posts

I have yet to find the correct diagram of my wiring harness part#801066 from my 2004 Malibu Wakesetter VLX. I was wondering if anyone else has done a continuity test on this year model or part#801066 which has been discontinued from Indmar... and I can see why they discontinued it because they even don't have it diagramed correctly in their manual...Indmar_MEFI4manual.pdf...  Here are some modified diagrams that I have found with a continuity test of my own.

Showing two false wires on part#801066 harness


Indmar wiring MEFI4


Indmar 801066 wiring harness

I like the way the first diagram shows how the wiring harness should be and I have altered my harness to run the fuel pump straight from the 40amp circuit breaker to the 15amp Fuel Pump Fuse Block (#1) and then to the relay fuel switch. I also rewired the fuel relay "on/off" command wire "hot side"to come from the 10amp Fuse Block Inj/ECM (#2) as they have it in both first and second diagrams. The third diagram is how I found my unaltered wiring harness with a continuity test and had melted the MEFI Sytem Relay (R#2).

Link to post
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...