2008 VLX Power Wedge stuck down

[RonDunn]

Hello, the wedge is down.I've checked fuses and switch . What's next? Is there any other thing I'm missing before pulling the boat out and bringing it to a shop?

Ron

[BearCreekBum]

The only other thing I can think of is to remove the power wedge wires from the Medallion control box and connect to a fused 12 volt source to verify the actuators are working. If that proves out then the wedge control portion of the Medallion box is probably faulty.

Good luck. 

[Zippymbr]

Do you hear any clicking in the wedge area?  This would mean the actuator broke internal and the control is fine.  You will need to test with a volt meter that the actuator is getting power first or test it with 2 jumper wires from a battery