Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Replacing old Rule 700 gph Aerator ballast pump with ?


FaithoverFear

Recommended Posts

FaithoverFear

I need to replace one or both of the aerator fill pumps for the rear ballast tanks. I have a ball valve attached to hull fitting then the old Rule pump which is appx 4" in height. It dosen't seem like I have room for the new attwood, piranha or tsunami pumps which all are about 6 1/4" tall. Anybody else had to change them out? This all started when I decided to take one of them out, to tighten the packing nut on the shaft. (Pain in btt on a V drive)  Anyway to measure the drip/second on land besides filling the hull with water which seems weird putting water inside your boat. Thanks in advance Chris

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...