Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Wobbly table

Recommended Posts

Anyone have any suggestions or videos for fixing a wobbly table on an '08 VLX? Screws are loose and won't tighten. I'm unsure if the compartment below the table is able to be lifted up even though there is a cutout on the carpet. Just don't want to pull apart the floor and make a mess if that compartment isn't meant to come up :) Thanks!

Link to post

I have not looked at the table base closely but on my 2008 LSV it is built into section over the gas tank. I’m pretty sure that section is made of honeycomb aluminum and is not hard to remove. I did have to remove the seat base across the back and that just lifted out.

Could you remove screws and rotate base 45 degrees and see if screws would bite into panel? I’m afraid the honeycomb around the base might be failing. Not sure a backing plate would help much if it is failing.

Sorry not much help. Good luck.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...