Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Engine Light only when surfing


Recommended Posts

Have a 2016 axis T23 and it will run wide open no problem but when trying to surf it gives a check engine light and going into “limp mode” when I try to check for codes there are none..?? Any hep would be greatly appreciated.. 

Link to post

what's the engine temp when this happens?

A semi-bad impeller can do this where it won't provide enough cool water under max load but is otherwise fine.  Also check for air leaks in your raw rater cooling system (for the same reason).

Link to post
14 minutes ago, shawndoggy said:

what's the engine temp when this happens?

A semi-bad impeller can do this where it won't provide enough cool water under max load but is otherwise fine.  Also check for air leaks in your raw rater cooling system (for the same reason).

Don’t remember what it was exactly just remember thinking it looked normal, was planning on grabbing an impeller tomorrow but will also look for air leaks as well, thanks!

Link to post
drewski300
19 hours ago, shawndoggy said:

what's the engine temp when this happens?

A semi-bad impeller can do this where it won't provide enough cool water under max load but is otherwise fine.  Also check for air leaks in your raw rater cooling system (for the same reason).

Had something similar and engine temp was the clue. Basically didn't know we needed to clean out the fresh water strainer. Cleaned it out and was back in business.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...