Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Right surfgate not extending


Recommended Posts

dreamlifeoc1

2019 Malibu 24mxz. While on the lake, the right gate starts to extend then retracts. After that right gate would not extend from start at all. Turned all power off a few minutes, recalibrate,  and also maintainence mode.  Both gates seem to function normal in maintenance mode. Went out for a few runs and right gate was functioning.  Then same problem, gate begins to extend, then retracts. No high speed gate warning and spee at about 11.3. Any suggestions?

Link to post

There are a bunch of good threads about surf gates in the maintenance and troubleshooting forum.  Very good info from people in the past who may not be around to repeat it here now for you.  There’s good info about ways to use jumpers to help troubleshoot the system and force it to function test.  That way you know if the part isn’t working bc it’s defective or merely just not getting the proper signal from the sg controller.  

Link to post

I always check the main power post connection on the port stringer under the center rear seat near the transmission mount and the battery ground cable on the engine bell housing first.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...