Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Indmar Monsoon 350 cam and crankshaft codes


Recommended Posts

2014 Indmar Monsoon 350

Ihave had boat for a year. When I first took it out was getting a crankshaft position sensor error. Dealer checked and couldn’t find a problem and cleared the code   Came back first time out but engine ran just fine. This year still getting crankshaft code but now engine skips or misses occasionally under load after running for an hour. Replaced crankshaft sensor. Now getting a cam sensor error along with crankshaft position error and still occasionally under a load misses after running for over an hour   It seems like it is getting worse the more we take it out. Any suggestions?

Link to comment

Carefully clean and inspect the connectors for your sensors.  If the spring contact in the female socket is not making good contact, you can get false readings.  You might need a small tool like a dental pick to gently pry the contact back into position.  Put a dab of grease on each contact before you reassemble the connectors.

Link to comment

CamSensorW

SPN 65723 CM 0

Mech. System not resp properly

FMI 7 OC 93

 

Cranksensor

SPN 636 CM0

Data erratic, int or incorrect

FMI 2 OC 110

Link to comment
  • 1 year later...

Did you figure this out I’m getting the same codes and symptoms. Just had an engine swap done and it’s now throwing these codes and running rough 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...