Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power Wedge I down position

Recommended Posts

Anyone know if the PW I on a 2014 Wakesetter in the full down position should be parallel to the water line, not angled up at all? Seem to be getting extra drag while surfing now and I noticed the wedge angle was off horizontal. I just had both wedge actuators replaced after blowing the mounts on them. 

Link to post

Check all the hardware that secures the wedge.  I went through something similar two years ago on my 13 23lsv.  I got under boat and there were a bunch of loose bolts.  Ended up pulling out of water.  Needed to get actuators done and they also recalibrated wedge and tightened everything up.  

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...