Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2016 Wakesetter LSV23 Wedge won't stay in stowed position

Recommended Posts


The only way to stow the wedge is to use the "Go Home" button.  Once stowed you can drive for a couple of minutes and then the wedge drops down and you have to slow down.  It reads that it is still stowed, but it is clearly not.  You can move the wedge into a range position it will move and perform properly, but it won't stow.  To stow you have to hit "Go Home" again, wait for it to stow, and then you can drive for awhile before it will drop down again.  Thoughts?

Link to post

Using the setting menu and selecting DEBUG ASSIST will let you see the wedge position and sensor voltage.  It will also allow you to move the wedge up and down a little every time the + or - icons are pressed.

What is the position and voltage when you move the wedge all the way down and all the way up?

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...