Spark Plug wires for 2000 Sunsetter LXi

[slap]

I’ve read all the existing threads and looked at Bakes, but I’m uncertain which wires are correct for my boat.

I’ve got the Indmar 5.7L 325hp 350ci Monsoon and the cap has 90 degree connections.

I’m tempted to just make my own if they no longer sell the numbered ones cut to the correct lengths.

Anyone have a link or part number for me?

 

[hethj7]

They may not be as clean in the install but Chevy 350 truck wires from that era should work.  The only issue I had going that route on my VLX was the coil wire was too short.  

Edited May 2, 2021 by hethj7

[justgary]

I bought an 8mm cut-your-own kit from one of the box auto parts stores and matched the lengths.

[slap]

Thanks, guys. I guess I’m right that they don’t sell them anymore. I’m going to make my own. They’ll probably be cheaper and better quality, anyway. 

[hethj7]

Bakes or Skidim may sell them but the locals parts store will be quicker.  

[slap]

I ended up buying these in blue, plus a crimper: https://www.jegs.com/i/Taylor/895/70251/10002/-1

 

[slap]

On 5/2/2021 at 8:58 PM, slap said:

I ended up buying these in blue, plus a crimper: https://www.jegs.com/i/Taylor/895/70251/10002/-1

 

Installed these, yesterday. They’re perfect. Jegs branded Chinesium ratchet crimper ($30) is a must. While you can certainly crimp with pliers or a cheap stripper, I wouldn’t recommend it.