M6 Water Strainer Replacement Mesh

[Slurpee]

Well folks I fumble fingered my water strainer mesh filter into 15’ of water. 

If this happens to anyone else with the M6 engine, then here is the part number and vendor to source it. Happily it is $5. 

Ron-Vic SE-L114-20CSS

https://www.vacmotion.com/Details.aspx?Cat=Accessories&Id=31

[Jborges]

Thanks for posting this! After de-winterizing my boat, My strainer cup was discolored with some cracking.  There was some green sierra antifreeze I guess left in it which the nylon plastic doesn't like.  Same site has the strainer cup and the dimensions match up so hopefully it will fit. They also have the gasket it looks like. 

[Slurpee]

6 hours ago, Jborges said:

Thanks for posting this! After de-winterizing my boat, My strainer cup was discolored with some cracking.  There was some green sierra antifreeze I guess left in it which the nylon plastic doesn't like.  Same site has the strainer cup and the dimensions match up so hopefully it will fit. They also have the gasket it looks like. 

Post the links to the jelly jar. That’s something else that I can see myself letting sink to the bottom. Doh. 

[Jborges]

This is what I ordered:

https://www.vacmotion.com/Details.aspx?Cat=Accessories&Id=64

It has a dimensional drawing that matches mine exactly . I'll know in a week if its the right one. 

And the rubber gasket:  https://www.vacmotion.com/Details.aspx?Cat=Accessories&Id=58

 

And this is what the cup looked like after having the green stuff in it:

[asnowman]

On 5/22/2021 at 7:34 AM, Jborges said:

This is what I ordered:

https://www.vacmotion.com/Details.aspx?Cat=Accessories&Id=64

It has a dimensional drawing that matches mine exactly . I'll know in a week if its the right one. 

And the rubber gasket:  https://www.vacmotion.com/Details.aspx?Cat=Accessories&Id=58

 

And this is what the cup looked like after having the green stuff in it:

Just an FYI (yeah i know, old thread) the guys at Vacmotion.com are awesome to deal with.