Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2017 Wakesetter 23LSV factory rack issue


Recommended Posts

NortherlyBoot88

So, I noticed at the end of last season my passenger side Malibu factory rack (non PTM clamping) would initially lock in place facing outwards, and then eventually work it’s way back facing into the boat.
 

I’ve inspected the pull release on the bottom of the rack and it seems to be engaging / disengaging whenever I pull down to rotate it from inside the boat (or parallel) to outside. I’m hoping a spring or pin may just be loose in the rack assembly and I don’t have a bigger issue... Has anyone dealt with a similar issue before, if so, what was the fix?

Thanks!

Clint

Link to post

Is the black sleeve around the pin tight? Check that first as the pin might not be engaging all the way. 
 

If it is not that, then the hole and or pin may be worn out and you may have to get replacement parts. Bakes may carry those parts. 

Link to post
NortherlyBoot88

@ahopkinsVTX I will check the black sleeve you’re talking about. I did keep two wakeboards on that side most of this season and occasionally ran in choppy water so maybe it’s wear and tear / something internal to the racks needs to be replaced. 

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...