Trailer Jack Mystery !

[THertner]

Gentlemen. I have looked around to try and find the stock swivel jack, or smaller bolt pattern, that mounts to this Performance trailer, and found nothing. Do you have one or replaced one?

Cheers!

[oldjeep]

Guessing something like this.  But you need to measure your hole to hole distances

 

https://www.etrailer.com/Trailer-Jack/Fulton/FTJ120W0301.html

[oldjeep]

Looking at it again, it appears to be the type that had a bolt in the center to hold the rest of the jack on and the bolt snapped.

You might be able to just redrill a mounting plate from a jack with a larger back plate and bolt it to those 4 holes

[Sixer]

I had an old jack on a Mastercraft that I'm re-doing. Started out rusty and junk. Once I finally got it off, I found that it had a special mounting spot built into the trailer, similar to what you have. Since everything else is new, I just found a Fulton jack and bolted it over the top of the previous mount. Was not able to use the old holes. 2nd pic isn't the greatest to see it, but the newer Fulton is on top of where the old one was. 

[PaulH86]

Great looking MC