Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Trailer Jack Mystery !


THertner

Recommended Posts

Gentlemen. I have looked around to try and find the stock swivel jack, or smaller bolt pattern, that mounts to this Performance trailer, and found nothing. Do you have one or replaced one?

Cheers!

IMG_5666.jpeg

IMG_5743.jpeg

Link to post

Looking at it again, it appears to be the type that had a bolt in the center to hold the rest of the jack on and the bolt snapped.

You might be able to just redrill a mounting plate from a jack with a larger back plate and bolt it to those 4 holes

  • Like 2
Link to post

I had an old jack on a Mastercraft that I'm re-doing. Started out rusty and junk. Once I finally got it off, I found that it had a special mounting spot built into the trailer, similar to what you have. Since everything else is new, I just found a Fulton jack and bolted it over the top of the previous mount. Was not able to use the old holes. 2nd pic isn't the greatest to see it, but the newer Fulton is on top of where the old one was. 

20200706_170856.jpg

20210109_104148.jpg

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...