Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Tower down mooring cover


TwoMargaritasPlease

Recommended Posts

TwoMargaritasPlease

Has anybody had success with these? I have a 19 25LSV with GX. Bought a cover for use with tower lowered from Commercial Sewing, Got the tower as low as it will possibly go. cover is still so tight I can't stretch it around the rear rub rail. Am I doing something wrong?

https://imgur.com/a/MsZEDEk

 

Link to post
TwoMargaritasPlease
1 hour ago, teamerickson said:

I’m guessing the ratchets are fully released?

Looks close. Shoe horn? 😜

Yes. I am very familiar with the use of the regular tower up covers.

Link to post
2 hours ago, Cole2001 said:

Slowly pull/shimmy the corner down. New covers are a pain to get around the back. 

And put some clear plastic over the cover to allow it to slide over.  It'll stretch.  Eventually.

Link to post
TwoMargaritasPlease
12 hours ago, Eagleboy99 said:

And put some clear plastic over the cover to allow it to slide over.  It'll stretch.  Eventually.

You mean under the cover? I never would have thought of that. Are you talking saran wrap or more like construction poly? 

I did finally manage to wrestle it down, with skinned knuckles to show for it. Thanks for your help.

Link to post
  • 3 weeks later...
  • 6 months later...
TwoMargaritasPlease
On 12/18/2020 at 5:33 PM, gregtay said:

@TwoMargaritasPleaseIs the tower down cover designed to work with the board racks on or off or turned in or...???  I have the Gx but I moved my clamping racks to the top location so I want to make sure it isn't designed for them to be on in the lower position only. thx

Apologies, I haven't been on this forum since December!

Racks have to be turned in. But you've probably already got your cover by now!

And yes, it did loosen up some so it is easier to install. I took on some water over the winter, I think because the vents are sideways rather than pointed down. I will tape them shut next winter.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...