2000 Sunsetter rear seat strut

[9irondesign]

Anyone know where I can find the part number to the struts that hold open the back seat on a 2000 Sunsetter? Ours are missing and would like to get a new set. Thanks!

[Eagleboy99]

Pretty sure it is these.https://www.amazon.ca/JR-Products-GSNI-5200-30-Gas-Spring/dp/B002UC2ZCM

 

[rustywskier]

I got one for the engine box strut on my 2001 Response LX from McMaster-Carr. It's probably not the same thing as the mount that you need, but you could do a search for "Ball Studs for Gas Springs" or "Ball Stud Mounting Brackets for Gas Springs" and maybe figure out one that works. You'll need to know dimensions, because there are a lot to choose from. Mine was P/N 9512K92 with a 10 mm diameter ball, but again that was for my engine box and the sundeck mount on my boat is a simple ball stud without the angle bracket. I usually get stuff from them next day by UPS Ground, but I'm in Virginia and close to a couple of their warehouses. Shipping and Handling charges are always kind of high from them, so I usually wait until I have several things that I need before placing an order.

[justgary]

I bought mine from a discount RV shop online.  GSNI brand listed above.