Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2000 Sunsetter rear seat strut


9irondesign

Recommended Posts

Anyone know where I can find the part number to the struts that hold open the back seat on a 2000 Sunsetter? Ours are missing and would like to get a new set. Thanks!

Link to post

I got one for the engine box strut on my 2001 Response LX from McMaster-Carr. It's probably not the same thing as the mount that you need, but you could do a search for "Ball Studs for Gas Springs" or "Ball Stud Mounting Brackets for Gas Springs" and maybe figure out one that works. You'll need to know dimensions, because there are a lot to choose from. Mine was P/N 9512K92 with a 10 mm diameter ball, but again that was for my engine box and the sundeck mount on my boat is a simple ball stud without the angle bracket. I usually get stuff from them next day by UPS Ground, but I'm in Virginia and close to a couple of their warehouses. Shipping and Handling charges are always kind of high from them, so I usually wait until I have several things that I need before placing an order.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...