Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Power bottom won’t light up, mtc blank

Recommended Posts

The power button on my 2012 mxz won’t light up after it is pressed(turned on) Voltage sitting at 0.5 volts. When should the power button illuminate? When battery is turned on? After pressing power button? 

Background: I found black wire connected to relay which drives power button led was disconnected. Black wire connects to pin 86 of the, which should be grounded to trigger relay.I e tree connected black wire to ground wire I found hanging close by. Seems correct, thoughts?

Background2: I am chasing this blue wire which feeds relay which feeds power button led. Reasoning is my mtc screen went blank. Could this blue wire be cause of that too? Thinking it should be at 12v. Any idea what is driving the blue wire?




Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...