Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2021 24mxz fuse box?


Recommended Posts

May be stupid but I can’t seem to find the fuze box. I’m real sure I blew a fuse for the front ballast. I had a 2019 same bot and it was under the dash this one does not appear to be in the same location on the new boat. Thanks for the help!!

Edited by Chuck0333
Link to post

There really isn't a "fuse box" for many of the components in the boat other than the breakers below the throttle/shift lever and various breakers in the battery switch compartment and the port aft breakers.

The breaker reset for the ballast pumps are done using the settings menu on the lower left helm touch screen.  If you touch the settings icon on the lower left, then touch diagnostics, then touch power module, you will have power module 1, 2, or 3 you can select.  Depending on the boat model you have, when you touch ENTER for power module 1, touch OUTPUT at the top of the screen and you should see a list of circuits for that power module.  "Ch 3 Bow Fill" and "Ch 4 Bow Drain" should be on that screen.  If one of them says "TRIPPED" in red, just touch the "RESET" icon next to it to reset the breaker in the power module and it should start working.  If the power module breaker keeps tripping, you may have some debris stuck in the pump, or the pump may be faulty, or there could an issue with the wiring or power module.

Hope this helps.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...