Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2007 wakesetter wake gauge fault


Aussiewakeboarder

Recommended Posts

 How does the wake gauge get its position signal ? There’s  no switch on the wedge to send a signal to the controller and there’s no way to calibrate the system . the needle position on my gauge doesn’t move at all even with a dash test using the sweep / full test , I also swapped the gauges to the wake plug with no luck 

I’ve searched the www. looking for a wiring diagram as the 2007 has a different control system to the 2008 and newer boats .. if I can confirm the power to the 4 pin plug on the back I can rule out wiring issues and replace the gauge  .  All other gauges work on my dash just not the wedge position one 

thanks hope some can point me in the right direction 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...