Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Trailer Brake Solenoid Wiring


jvianco

Recommended Posts

Anyone know what the  2 wires coming off the solenoid are?  I'm replacing the entire UFP A-60 slide member on my trailer, and my solenoid only has 1 wire coming off of it, and of course the instructions don't include a wiring diagram.  I'm assuming the white one may be a ground, but I would rather be sure before I connect it to something it shouldn't be connected to.

https://drive.google.com/file/d/1oYL7Xu7XNcvs53xFai5fKbBghJByQ27l/view?usp=sharing

https://drive.google.com/file/d/1obGab7Ihf8Bzn4eBAdQdz9y8y2AaMQG8/view?usp=sharing

Edited by jvianco
Link to post

I have seen some actuators with a white ground wire spliced from the trailer harness plug that connected to the reverse solenoid valve using an small eyelet on the wire and a short 10-32 or similar screw that goes into one of the two threaded holes on the very bottom of the valve to provide a ground to the valve.  The blue wire should be molded directly into the solenoid.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...