Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Ballast Fill Indicator Inaccuracy


YYCMXZ

Recommended Posts

Hi All,

 

I have a 2020 22 MXZ and I am having trouble with my center ballast tank fill indicator only showing a max fill of 90% before I have water coming out the side. It will not show 100% full when I have a consistent stream of water coming out of the side of the boat. Has anyone come across this issue in the past? I feel like something may not be calibrated properly in the software or that I have a bad signal coming from that ballast tank? Or could it be something as simple as I have some trapped air in the tank its not letting the float for the indicator come to the top of the tank?

TIA  

 

 

Edited by YYCMXZ
Link to comment
  • 3 weeks later...

20 22 LSV, center tank never shows empty, usually stops dropping at 15% which is when the water is gone, does not turn off the pump when emptying the tank.  Dealier has pulled tank and checked sender, says it is working correctly.  

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...