Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Fault Code KnockSensor2 520197


Recommended Posts

We ran the boat at full throttle to try get back to the covered slip to beat the rain yesterday. An alarm sounded. It had a fault code: KnockSensor2 SPN 520197 CM 0

Voltage Short or below normal RNG FMI 4 OC 1

I haven’t looked yet. Due to the code description, I assume there is a knock sensor on each side of the block. If so, which one is knock sensor 2?  How do I troubleshoot to determine if it is a bad sensor or what other problem it may have?

2013 TXI Monsoon 350

Edited by 4skinuts
Omitted engine information
Link to comment

On my 03 there is only a knock sensor on the starboard side. So would #2 be port side?  K/S codes normally don't come in till you get above 3000-3500 rpm.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...