Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

ZF Hurth


Recommended Posts

ZF Hurth 45 IV

I have sheered off the pin that holds the gear driving the oil pump due to a log hit at low speed. I cannot find a pin available in the USA. Nothing else wrong with the transmission. New trans is backordered until at least mid October. Does anyone have any ideas or sitting on a trashed transmission that my have a salvageable pin. Already been off the water since early August and have talked to a machinist about making one but to difficult. Its not a simple straight pin like a prop pin. 

Link to comment

what a bummer :( 

So I would get on the MasterCraft/Nautique/Moomba/Supra/Tige forums and ask this question because this was a commonly used trans.  I would start calling dealers asking if they have skeleton or any dead ZF Hurths sitting around.  I think you might get lucky if you spread the word

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...