Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Installing a new key ignition in 2010 LSV Wakesetter

Recommended Posts

Recently my 6 button keyless push start pad went out and I was told Malibu discontinued the keyless option for this boat.  They sent me the key ignition.  Dumb question, I'm sure, but can anyone provide any info on wiring it in? The old harness has 6 wires (gray, black, red, purple, yellow, white) and the new harness for the key ignition has 4 wires (Yellow, red, purple, and white with a blue stripe).

Thanks in advance.

Link to comment
  • 1 month later...

I’m not much help on the solution, but I had the same situation there the "start" button on the key pad went out. I took it apart and tried to fix the button, but it eventually failed again. Were you able to get this key ignition installed? If so, how did you hook up the 4 vs. 6 wires? Where and how did you get the key ignition? I have 2 dealers looking in to finding me the keyed ignition, but no luck so far.

Link to comment

From your description, I am guessing that the gray and black wires provide power to the old keypad.  The others would then go on the new switch as the same colors.  You could test with a meter to see if gray has 12v relative to black. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...