Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Wedge actuator broken pivot repair

Recommended Posts

Last year we hit a stump and it ripped the wedge actuator pins off the actuator. 


I tried using some JV weld on them and it only held for a few outings. Now the fault wasn’t the jb weld but my application of it. However this time I tried using Gorilla two part epoxy. 

I made a form using masking tape and poured in the epoxy resin. 


after it hardened I removed the tape and sanded some and then drilled a new hole. This looks 100x stronger than my first fix. 



I hooked it up to the boat and they are working perfectly. Time will tell how strong it is but at this point no need to spend 400$ plus to replace the actuators because if a broke piece of plastic. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...