Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

05 vride ECU display. Electrical works except for bilge and blower


Recommended Posts

Hi all. I hooked up the batteries (2 size 31 agm 800 and 1125 cca, one new, the other checked ok at autozone. I was planning on launching tomorrow. Curve ball. Dashboard flashes ECU and shows O hours. Stereo, lights, ballast pump work. Bilge and blower do not, lights are on though. Circuits look good. I tried the circuit breaker by the batteries but did not seemed soft to touch and did not “make a click sound”. Dash gauges work Except battery voltage says 0. Afraid to start with blower not working and the ECU code.  Any advice?  Thanks. 

Link to comment
formulaben

First thing I would do is check your grounding block under the dash, there should be several screwed into the block...if dirty or corroded, clean them but for sure tighten them all.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...