2020 Malibu 23 MXZ Flooring Bubble

[Mbianco44]

Hey there I’ve got a new 2020 23 MXZ and the stock Malibu soft grip flooring is bubbling up when it’s hot out. When it’s cold it goes away and I’ve tried to press and stick it down but it always pops back up. And thoughts on quick fixes w/o going to the dealer. 

[ahopkins22LSV]

Use a tiny needle to put a pin hole in it, push it back down while pushing the air towards the pin hole. 

[Idamon]

How will that impact longevity if you leave a hole for water to get into? Better to have dealer rip it up and redo it?

[ahopkins22LSV]

5 hours ago, Idamon said:

How will that impact longevity if you leave a hole for water to get into? Better to have dealer rip it up and redo it?

The hole is practically seal 100% up once you press it all back down. You aren’t using a half inch drill bit to create the holes, you will use a needle. 

[camcruiser13]

12 hours ago, ahopkinsVTX said:

The hole is practically seal 100% up once you press it all back down. You aren’t using a half inch drill bit to create the holes, you will use a needle. 

second this'

 

 

plus if it gets water in it and ruined take it in for warranty work. the floors are covered    as long as you dont half inch drill it

[Mbianco44]

Needle trick worked thanks for the help!

[Gaffster01]

I’m going to try this as well notice I have a bubble in my floor today when we were out.