Advice on these Bags

[jonthefireman]

Crew, need a little info and advice on these bags I picked up today.  Found a great deal on these two 750 Fatsac's locally, were removed from a new Axis almost immediately.  I plan on using them in my older '08 247 in the rear lockers on top of my hard tanks, but I'm a little perplexed on the current fittings.  I was under the assumption that all Fatsac's come without fittings, but these two front and back do not want to unscrew from the port.  Is there a difference between these bags and regular FS's?  I planned on just buying the FS Supa pump and using the top port and capping the others.  Am I missing something?

 

[vanamp]

They may have been glued.  Those are definitely fittings and not part of the bag.  Might try a little heat but would need to be carful.  You could make a cap using a flo-rite fitting but part cost would likley negate the deal you got on the bags. 

[asnowman]

There is one fitting in each of those bags the was glued in. 

[jonthefireman]

6 hours ago, vanamp said:

They may have been glued.  Those are definitely fittings and not part of the bag.  Might try a little heat but would need to be carful.  You could make a cap using a flo-rite fitting but part cost would likley negate the deal you got on the bags. 

Thanks, I knew that I was going to need to buy fittings so no big deal.  Good call on the flo-rite fitting with the caps, I can do that on each end and just use the top for the pump.  They have to be glued, I put a wrench on them and they didn't budge. 

[WooPig]

I actually called about these bags and he had just sold them.  It was a great deal....hope you enjoy them!