Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
AZ19Axis22

2019 Axis A22 Recommended Surf Prop

Recommended Posts

AZ19Axis22

I recently purchased a 2019 Axis A22 with a Monsoon 409 motor.  The prop on the boat is slightly bent causing vibration especially with added weight.  The current prop is an ACME 2249.  WakeMakers recommends ACME 2247.  The only difference is the cup of the 2247 is .150 versus the 2249 that is .105.  What kind of difference will this make for speed versus wave?  Is there a better prop recommendation for overall performance.

Share this post


Link to post
smuurph84
1 hour ago, AZ19Axis22 said:

I recently purchased a 2019 Axis A22 with a Monsoon 409 motor.  The prop on the boat is slightly bent causing vibration especially with added weight.  The current prop is an ACME 2249.  WakeMakers recommends ACME 2247.  The only difference is the cup of the 2247 is .150 versus the 2249 that is .105.  What kind of difference will this make for speed versus wave?  Is there a better prop recommendation for overall performance.

I’m not much of a mechanic and there are plenty on here that are a lot more intelligent than me on the topic , but I wouldn’t run the boat over idle with a bent prop , especially if u feel vibration 

 

 

Share this post


Link to post
AZ19Axis22

Thanks smuurph84.  I am going to have the current prop repaired and keep as a spare and looking for a recommended prop.  The 2249 and 2247 are the two recommendations based on what came on the boat and what WakeMakers is recommending on their site.  I have seen some others mentioned in other posts but mostly for older boats with different motors.  Any recommendations are appreciated.

 

Share this post


Link to post
vanamp

I had the 2773 on my 2018 T22 as the high torque option from the factory and the RPMs were too high.  Switched to the 2247 and it was a lot better.  We surf 100% of the time. 

Share this post


Link to post
AZ19Axis22

Thanks vanamp

 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...