G4 tower

[Bleeker]

Anyone running a G4 with one set of rev 8 and one set of rev 10. It’s a financial thing so only want to buy 1 set of 10s. Want to know if it’s even possible with spacing 

[CJAY]

If you can fit 2 sets of Rev10s you can fit a set of rev 8s and rev 10s, not sure adding the rev8s is worth it though

[Bleeker]

2 sets of 10s requires that illusion bracket I believe and I’m trying to stay away from that 

[CJAY]

It does, and why?

[Bleeker]

Spacing issues 

rev 10 are to large to fit side by side with mounting location on the G4. But that’s just why I’ve read. Trying to figure out before I spend the money 

[CJAY]

57 minutes ago, Bleeker said:

Spacing issues 

rev 10 are to large to fit side by side with mounting location on the G4. But that’s just why I’ve read. Trying to figure out before I spend the money 

Like you said you need the bracket.  Why are you trying to avoid the bracket?  You can see in my profile pic that my 2 pair of rev10s fit fine on my G4 and I have the bracket, it's a small bracket 

[The Hulk]

I'd mount 10s on outside for more head clearance and keep 8s in center 

[COOP]

The G4 tower has the mounts across the top, no need for the spacer like the G3 tower. 

[Ole2TTs]

I have a G4 with 4 Rev10s.  Granted its the factory version rev10s but I dont see why you would have issues otherwise.

[robbieg247]

On 11/21/2019 at 10:27 AM, Ole2TTs said:

I have a G4 with 4 Rev10s.  Granted its the factory version rev10s but I dont see why you would have issues otherwise.

3 sets rev 10 

[Bleeker]

You ordered rev 10s from the factory