Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Additional plumbed bow bag


Brandonloos21

Recommended Posts

I have 17 t23 with pnp bag under the cushions, and am looking to plumb in an additional hose(s), pump, and switch, so that I can take another bow bag and set it on the seats, clip it in, and have a switch wired at the helm to fill it. I would hide the hoses under one of the cup holder areas. I’m not sure if i could piggyback off of the stock pnp lines or what i would have to do. I’ve seen it done before, but can’t find it on any forums. If anyone has any idea how I could do this, any intuition would be greatly appreciated!

Link to comment

I was going to do this on my old boat but never got around to doing it. Basically just use a reversible bump so you only need one line and you manually venting would be easiest as it’s right there.   Personally I would just run lead but plumbing it in would definitely make it easier. 
 

Read this 

 

Link to comment
  • 2 weeks later...
On 10/27/2019 at 10:25 PM, Brandonloos21 said:

I have 17 t23 with pnp bag under the cushions, and am looking to plumb in an additional hose(s), pump, and switch, so that I can take another bow bag and set it on the seats, clip it in, and have a switch wired at the helm to fill it. I would hide the hoses under one of the cup holder areas. I’m not sure if i could piggyback off of the stock pnp lines or what i would have to do. I’ve seen it done before, but can’t find it on any forums. If anyone has any idea how I could do this, any intuition would be greatly appreciated!

I think @IXFE was doing a cup holder feed  in the 23 LSV ( same boat sort of) he was sporting in ‘17,  might have been ‘18, but he used a reversible I think with a new  thru hull drilled opening ?  Or maybe he T’d into existing fill and drain openings with the reversible but I think you need a new thru hull with a reversible so it had its own fill/ drain path

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...