How to wire set of subwoofers

[Brandonloos21]

So I’m buying 2 subwoofers and an additional amp to hook up in addition to the current sub and amp on my axis sp2.. what I am wondering is if I’m able to get a splitter and take the subwoofer rca wires from the original amp into both the original and new amp. 

Also, could I tap into the same remote from the original amp.

Also, where would you recommend me getting power from for the new amp? I have the dual batteries. 

Edited August 1, 2019 by Brandonloos21

[23LSVOwner]

10 hours ago, Brandonloos21 said:

So I’m buying 2 subwoofers and an additional amp to hook up in addition to the current sub and amp on my axis sp2.. what I am wondering is if I’m able to get a splitter and take the subwoofer rca wires from the original amp into both the original and new amp. 

Yes

10 hours ago, Brandonloos21 said:

 

Also, could I tap into the same remote from the original amp.

Yes

10 hours ago, Brandonloos21 said:

Also, where would you recommend me getting power from for the new amp? I have the dual batteries. 

Do you have the power and ground splitters?

 

If so swap them out for ones that have an additional connection for the new amp.

 

[Brandonloos21]

35 minutes ago, 23LSVOwner said:

Yes

Yes

Do you have the power and ground splitters?

 

If so swap them out for ones that have an additional connection for the new amp.

 

Most likely, I haven’t checked. I’m guessing main power goes into the middle then splits into 2 in the sides?

[23LSVOwner]

3 minutes ago, Brandonloos21 said:

Most likely, I haven’t checked. I’m guessing main power goes into the middle then splits into 2 in the sides?

That is a single example. There are tons of options. Look at your setup and you will see the main power wire going to the battery.