Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Batteries/high output alternator


Cortharper

Recommended Posts

I know there is a million of these same questions out there but I need some help here and dont know which route to go. I already purchased a Stinger 2250 battery thinking this would be the fix. However I dont want to shorten the life of this high dollar battery.. I am running the below:

Wetsounds 

Qty:2 syn 4s. Each running a set or rev 10s on tower.

Syn 6 - to run 6 - 6.5s in boat

Sinister sd2 - pushing JLW6 (10) and an audiobahn 12. 

I am running the WS420 to control it all.

I have the stinger 2250 battery 2 for all this. And battery 1 starter battery blue top optima. Stock alternator. I am running the boat most the time while tired up so I do not deplete the battery or run it down to far. What would you reccomend to be able to run my system longer and not have to be constantly watching the voltage meter adjusting the subs and volume? Any help, advice would be greatly appreciated. Sorry to post and ask some of the same questions others are asking..

2011 Malibu 23LSV.

 

Link to comment
2 hours ago, Cortharper said:

 What would you reccomend to be able to run my system longer and not have to be constantly watching the voltage meter adjusting the subs and volume?

One or two more batteries. The optimal goal would to not have to idle the engine when tied up or anchored. 

Link to comment

Awesome! I appreciate the quick response and both of yalls feedback.   If I decided to go with that alternator is that just a simple pull and replace straight bolt on? Or is there anything else I'd have to do? 

Link to comment
23 hours ago, Cortharper said:

Awesome! I appreciate the quick response and both of yalls feedback.   If I decided to go with that alternator is that just a simple pull and replace straight bolt on? Or is there anything else I'd have to do? 

Yes i pulled the factory Alt and bolted that right on.  

Link to comment
16 hours ago, Skymedic said:

If you go the alternator route, you’ll have to replace to factory wiring as well. FYI

True i had leftover 1 gauge and used that but that was overkill 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...