Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

2020 Post up your new Malibu/Axis boats.


Ronnie

Recommended Posts

On 8/17/2019 at 11:31 AM, Eagleboy99 said:

I've noticed no one says "Hit it" anymore.

Between my wife and I, we just use "tight, and go" - as in get the slack out and hit it at driver discretion.  The driver makes the decision when to go with lake traffic, and if the rider happens to fall out of position in the case of prolonged wait (very rare), just let go of the handle.  

Link to comment
7 hours ago, 23LSVOwner said:

None right now that I know of.

Could be some loose connections?

You could be on to something.  The Cat5 cable on my 21VLX was bad, but the symptoms were much worse.  I'll have the dealer take a look.

 

Thx! 

Link to comment
20 minutes ago, jason427 said:

Just delivered the other day. 2020 23LSV. Wes from Tommy's hooked us up as usual. Third boat in 4 years from them. I like some of the new features from our 2018. Flip down seat/step in the back is really cool. New dash/screens start up crazy fast. New M6DI seems nice and quite. Haven't surfed it yet but looking forward to it. 

95B493E5-1470-4B4A-9D9D-B394829B141E_zps

3759E0F8-0172-43AF-A957-357067D4D35A_zps

Very nice.  Congratulations! 

  • Like 2
Link to comment
On 8/24/2019 at 8:36 AM, jason427 said:

Just delivered the other day. 2020 23LSV. Wes from Tommy's hooked us up as usual. Third boat in 4 years from them. I like some of the new features from our 2018. Flip down seat/step in the back is really cool. New dash/screens start up crazy fast. New M6DI seems nice and quite. Haven't surfed it yet but looking forward to it. 

95B493E5-1470-4B4A-9D9D-B394829B141E_zps

3759E0F8-0172-43AF-A957-357067D4D35A_zps

That boat slip doesn't look like fun to get in and out of! Sweet ride!

Link to comment
3 minutes ago, Chappy said:

That boat slip doesn't look like fun to get in and out of! Sweet ride!

Haha, after admiring the tan interior, that was my first thought... hope there is a steep drop off in front of the mangroves!

Link to comment

Haha, funny you say that. That house was JUST built and I was hoping his dock would be further North!

If there is no wind it's a piece of cake. If wind is out of the East its a b****... 

I was laughing yesterday wishing I spent the small fortune on thruster option... LOL 

0ECD1B5A-7773-4FC9-8664-819768B62006_zps

25923E34-20DA-4198-AB59-DF33F015D71C_zps

 

 

  • Like 1
Link to comment
On 8/17/2019 at 12:31 PM, Eagleboy99 said:

I've noticed no one says "Hit it" anymore.

We still do! It's nice to have consistency especially with 4-6 young kids in the boat. Then there is no confusion on what is said between the rider to the driver. 

Generally the lingo I prefer to use is "tighten up" and then "hit it". My mom drives me a good portion of the time (she's in her 60's) and this is what she understands best:lol:

Link to comment
4 minutes ago, Ole2TTs said:

Added 2020 logos to my 18.  This basically counts as taking delivery of a 2020 right?

driveway 1.jpg

logo.jpg

Would be willing to share the cost of those and where you got them?

Link to comment
  • 2 weeks later...
17 hours ago, Wakesetter67 said:

Well delivering our boat this Thursday to the new owners! I will tell you I'm not sure I'm ready to give up my old color scheme, But This should turns some heads as well! Going to place the order this week, Bummed that they dont offer the Indy red MALIBU Logo for the 2020, Black will disappear, White....NOT and the Grey Well its Grey! I guess I can order a 2019 Red Emblem? are they much different then a 2020? IMG032126574.jpg

Grey looks a little silver/metal in person.  I believe the 2019 red ones are the exact same as the 2018's they just paint red inside the black chrome.  On this particular boat I'd go the black route and mute it.  But I did see a mostly black MXZ with indy red and metallic silver with the grey/silver emblem and it looked pretty good!

  • Like 1
Link to comment
On 9/8/2019 at 9:41 PM, Wakesetter67 said:

Bummed that they dont offer the Indy red MALIBU Logo for the 2020, Black will disappear, White....NOT and the Grey Well its Grey! I guess I can order a 2019 Red Emblem? are they much different then a 2020?

Glad you're changing it up and think the new design looks great! What's the interior going to look like?

 

As for the logos, they're completely different for 2020 and super cool. See the post a few above of a close up shot of the white logos. They're all one color (not chrome outline w/ black fill) and a whole different finish. Really neat.

Link to comment
11 hours ago, Suggy said:

Glad you're changing it up and think the new design looks great! What's the interior going to look like?

 

As for the logos, they're completely different for 2020 and super cool. See the post a few above of a close up shot of the white logos. They're all one color (not chrome outline w/ black fill) and a whole different finish. Really neat.

Going with Dark Grey with Black accents, Red Pipping, and Some custom GatorStep Masons going to come up with! I do like the new Logos But I wonder if I can special order the Indy red? None of the other colors will look good at all, Boring(: Maybe I can have them wrapped? 

Link to comment
13 hours ago, Wakesetter67 said:

Going with Dark Grey with Black accents, Red Pipping, and Some custom GatorStep Masons going to come up with! I do like the new Logos But I wonder if I can special order the Indy red? None of the other colors will look good at all, Boring(: Maybe I can have them wrapped? 

I know you've done this before, but I'd be careful on black accents. I'd only do black on the piping or cushion panel. They get real hot. I got on a boat in the water that had graphite next to black accents and even the small amount got hot. Just my two cents.

The custom GatorStep will be dope! Black over red would be sweet. I know you had black in your other boat. Can always ask if they'll do special order! I'm not sure on that one.

  • Like 1
Link to comment
10 hours ago, Suggy said:

I know you've done this before, but I'd be careful on black accents. I'd only do black on the piping or cushion panel. They get real hot. I got on a boat in the water that had graphite next to black accents and even the small amount got hot. Just my two cents.

The custom GatorStep will be dope! Black over red would be sweet. I know you had black in your other boat. Can always ask if they'll do special order! I'm not sure on that one.

Ya I did not notice the Black as a problem, But we dont get that hot here, Average about 80 ish Yes I think Mason has some great ideas for the Gator step! Stay tuned

Link to comment
On 9/10/2019 at 8:23 PM, Wakesetter67 said:

Going with Dark Grey with Black accents, Red Pipping, and Some custom GatorStep Masons going to come up with! I do like the new Logos But I wonder if I can special order the Indy red? None of the other colors will look good at all, Boring(: Maybe I can have them wrapped? 

I love the dark graphite!

  • Like 1
Link to comment
18 hours ago, Wakesetter67 said:

And as a last minute add,  thanks to some awesome special people, the new swim step!

Post up the build sheet! Would love to see what options you went with and see how much more of your money we can spend :werule:

  • Like 2
Link to comment
On 9/13/2019 at 4:44 PM, Wakesetter67 said:

OK It's Official, Spray Date: Oct 31st. Such a spooky cool date! I'm beyond stoked on this new 2020. I opted to go with the M6DI ( I have never had anything but  base motors in all my boats! ) This makes me excited! I really love the new operating system on the helm! Love the thicker seat material! And as a last minute add,  thanks to some awesome special people, the new swim step! My daughter was bummed it wasn't on the build sheet! So now everyone is happy! Mason from Gatorstep will be creating our Flooring, cant wait to see what he comes up with! Count down to Spring!!! ( Too Soon?           70309245102173343726.jpg                                                                                                                                                                       IMG0345.jpg                                                                                                  70526734102173343714.jpg

That is one beautiful  boat! Can’t wait to see the pics on the water. Pictures never do them justice. Especially the pics from the boat builder. 

  • Like 3
Link to comment
  • 3 weeks later...
On 8/15/2019 at 9:26 PM, SCMike said:

The screen on mine freezes up all the time. I’m really eager to hear how the new OS performs.  

Same here on my 2019. It’s terrible. Taking it into the dealer and hope they can fix it. 

Link to comment
On 8/16/2019 at 3:42 PM, ahopkinsVTX said:

I agree the volume adjust on mixer screen is slow. That is why I just toggle the zones in the button below the main volume bar and use the sport knob. Which there is still delay if you spin it super fast but nearly as bad. 

You can change the mixer with the sport knob?  I didn’t know that. Our mixer, if it works, updates 30+ seconds after you push the up or down arrows. It’s so painful coming from a WS420 on my last boat. 

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...