Jump to content

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Engine fault 2007 lsv


Recommended Posts

Hello, I’m new to the site.  Recently acquired a 2007 237lsv with 383 hammerhead.

Awesome craft!  Runs great, but sometimes when I shut off and float for a couple minutes...it fires right back up. But then reads engine fault and will not engage....All help VERY much appreciated!

could not figure bout how to post a picture of the error code. But reads:

Fault 1 of 1

etcpps2Range

SPN      64604   CM  0

Bad intelligent device or Comp 

FMI 12   06    127

 

 

 

 

 

Edited by GLang
Link to comment

The electric throttle and shift handle at the helm has two peddle position sensors (PPS1 and PPS2).  If the voltage is out of range for one of them, there will be a SERVICE REQUIRED alarm and the throttle will only run at idle speed only until the engine is restarted.

You can unplug the throttle control harness and check for a damaged, loose, or corroded pin and clean or fix it as needed.  If there is a problem with the sensor in the helm control, it will likely need to be replaced.  There are other things that can cause the DTC, but I would check the harness and control sensor first.

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...