2013 Axis A22 code reader

[Canusa]

Crew, can anyone tell me if there is a special marine code reader for an Axis? I got a “service required” message on my cluster along with a red engine light that I want to diagnose. 

Also, where is the port to plug it in? 

[boardjnky4]

Rinda Diacom. Costs around $600. Plug is near the ECM in the engine bay. Usually port side, clipped the side of the bracket that holds the ECM.

Edited June 8, 2019 by boardjnky4

[Eagleboy99]

Not sure if this will work but a heckuva lot less than the Rinda!  https://www.michiganmotorz.com/codemate-tester-mefi-code-reader-p-2459.html  Or your dealer I guess...

[boardjnky4]

19 minutes ago, Eagleboy99 said:

Not sure if this will work but a heckuva lot less than the Rinda!  https://www.michiganmotorz.com/codemate-tester-mefi-code-reader-p-2459.html  Or your dealer I guess...

Won’t work. 

[Eagleboy99]

Well that is too bad.  $600 to reset a light/code.  As bad as BMW.

[boardjnky4]

1 hour ago, Eagleboy99 said:

Well that is too bad.  $600 to reset a light/code.  As bad as BMW.

It does way more than that, but it’s the only way to really read and reset codes for sure.

[granddaddy55]

Wow, I must be really lucky or ‘14 is a dependable year cause all I have ever had to do is SG calibration and SG service .

had sp1 from The start until we installed aftermarket 

my boat has seemingly nothing to go wrong but I’m always hearing about motors throwing codes 

I’m so glad , just hope my turn isn’t next !