Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
Cuhleb

AUX plug-in issue

Recommended Posts

Cuhleb

Crew, 

I'm having some issue with my aux connection on the boat and I am not a stereo expert...

It's a 2010 wakesetter vlx with a JBL Black Box, Rockford speakers, amps, sub. The black box connects to multiple things like the stereo head unit, aux, USB, etc. I mainly use the aux to play music from my iphone because the radio static sucks. I was out on the lake memorial weekend and on the last day the aux just quit working and would not play music (this was after a few rain showers passed....). Long story short, i ended up replacing the aux cord with a new one that runs directly from the black box to my phone and it worked fine. I went out on the lake again and after an hour it quit working again... No clue what's going on. Not sure if I need to buy a new black box or what. Any and all suggestions would be much appreciated!! 

Share this post


Link to post
Share on other sites
wdr

Is it plugged into the aux port in the glove box? That head plug in went south on my 2010 after about 3 year of ownership. I plugged directly into the RFX-3000 (BB) after that with out an issue. All of my stereo issues started and ended at the BB. Vibration and poor workmanship were a constant issue with it until I cleaned up the wires and plug ins on the back side of the amp board.

Share this post


Link to post
Share on other sites
Cuhleb

Wdr, I removed the connection from the BB to glove box port to separate aux cord in the glove box. I replaced all that with a single RCA to aux cord, now having one cord run directly from my BB to my iPhone. Like I mentioned, it worked for about an hour the next day at the lake but then cut out again... Everything else that is connected to the BB still works as intended. I'm wondering if it's some poor connection between the BB and aux...?

Share this post


Link to post
Share on other sites
prwkbrder

What is the link to were you bought the replacement cord

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...