Jump to content

 

Welcome to TheMalibuCrew!

As a guest, you are welcome to poke around and view the majority of the content that we have to offer, but in order to post, search, contact members, and get full use out of the website you will need to Register for an Account. It's free and it's easy, so don't hesitate to join the TheMalibuCrew Family today!

Sign in to follow this  
vwztips

2001 Sporster LX center fin bent? Replacement?

Recommended Posts

vwztips

I just purchased this boat in March. I have it on my lift and was inspecting it from below. This boat has 2 stabilizer fins in the middle of the boat. The leading edge of the front one is bent and shows a hairline crack at the base. I am assuming the bend is not factory.

However, even if the fin was not bent, they don't intentionally appear to line up in a straight line from the factory. Is that right?

I took the 4 bolts out that holds it to the hull. Is there anything on the inside of the hull that holds it on or is it just held in place with marine caulk and I will need to persuade it to move?

Where can you purchase one of these? Anyone have a part #?

 

 

20190601_125304.jpg

20190601_125230.jpg

20190601_125217.jpg

Share this post


Link to post
Share on other sites
Eagleboy99

Mine are straight in line - all three. You could try Marinehardware.com but I'd start with Paul at bakesonline.com

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...